Want to master the ollie on your Tech Deck and impress everyone around you? You’re in the right place.
Learning this trick might seem tricky at first, but with the right steps, you’ll be popping your Tech Deck off the ground like a pro. Imagine the thrill of nailing that smooth ollie every time—whether you’re showing off to friends or perfecting your skills solo.
Keep reading, and by the end, you’ll know exactly how to do the ollie on your Tech Deck with confidence and style. Let’s get started!
Credit: www.instagram.com
Choosing The Right Tech Deck
Choosing the right Tech Deck is key to learning the ollie trick smoothly. A well-suited fingerboard feels natural and helps build confidence fast. The size, wheels, and trucks of the Tech Deck affect how it moves and reacts under your fingers. Picking the right parts makes practicing more fun and less frustrating.
Selecting The Ideal Fingerboard Size
Fingerboards come in different sizes. Smaller boards are easier to flip but less stable. Larger boards offer better balance but can be harder to control. Most beginners do well with a medium size, about 96mm long. This size fits most fingers and feels like a real skateboard. Find a size that feels comfortable to hold and control.
Picking Suitable Wheels And Trucks
Wheels and trucks affect how your Tech Deck rolls and turns. Softer wheels give better grip and smoother movement on rough surfaces. Harder wheels slide more but can be faster on smooth surfaces. Trucks need to be tight enough to hold the board steady but loose enough to turn easily. Test different wheels and trucks to find the best fit for your style.
Mastering The Basic Stance
Mastering the basic stance is the foundation of performing a smooth ollie on your Tech Deck. Without a solid stance, your balance and control will falter, making the trick frustrating and harder to land. Getting comfortable with where and how your fingers rest on the board sets you up for success every time.
Finger Placement Tips
Your fingers act like the wheels and brakes of your Tech Deck—they control movement and stability. Place your index finger near the front bolts of the board, slightly angled for better control. Your middle finger should rest just behind the back bolts, ready to pop the tail.
Keep your fingers relaxed but firm. Too much tension will slow your reaction, and too little will reduce control. Try adjusting finger positions slightly during practice to find what feels natural and gives you the best snap when popping the board.
Balancing On The Board
Balance is not about standing perfectly still—it’s about being ready to shift your weight quickly. Position your thumb along the side edge of the board for extra grip. Keep your wrist loose so you can flick the board as needed.
When you stand on the Tech Deck, imagine you’re ready to spring into action. A slight bend in your fingers and wrist helps absorb the pop and guides the board’s movement. Have you noticed how your balance changes when you lean too far forward or backward? Adjusting your stance to stay centered makes landing the ollie much easier.
Step-by-step Ollie Technique
The ollie is the foundation of many Tech Deck tricks. It lets you jump the board without touching the ground. Practicing the ollie improves control and balance on your Tech Deck. Follow these simple steps to learn the ollie technique clearly.
Popping The Tail
Place your back finger firmly on the tail of the Tech Deck. Press down quickly to make the tail hit the surface. This pop creates the lift you need to jump. A sharp and fast pop gives the best height.
Sliding The Front Finger
Slide your front finger from the front of the board towards the nose. This motion levels the board in the air. Keep the slide smooth and steady for better control. The slide helps the board stay under your fingers.
Lifting The Board
As the tail pops and your front finger slides, lift the whole board. Use both fingers to guide the board upwards. Keep your fingers close to keep balance. Focus on timing the lift with the pop and slide movements.
Credit: www.youtube.com
Common Mistakes To Avoid
Practicing the ollie on a Tech Deck can be tricky. Many beginners make simple mistakes that slow their progress. Avoiding these errors helps improve balance and control.
Focus on small details. These details make a big difference in your ollie performance. Watch out for common mistakes that affect your trick’s success.
Incorrect Finger Position
Finger placement is key for control and pop. Placing fingers too close to the edges reduces stability.
Keep your index finger near the front bolts. Your thumb should rest on the tail’s side. This grip gives better leverage.
Wrong finger position causes the board to slip or not pop properly. Practice holding the Tech Deck firmly but relaxed.
Insufficient Pop Or Slide
Not popping the tail hard enough stops the board from lifting. A weak pop means the board stays flat on the surface.
Slide your finger quickly off the edge after popping. This helps the board level out in the air.
Dragging your finger too slowly or not sliding at all causes the trick to fail. The ollie needs a sharp, fast slide.
Improving Your Ollie
Improving your ollie on a Tech Deck takes more than just a few attempts. It requires focused effort and smart practice. By honing your skills carefully, you’ll see your tricks get cleaner and more confident.
Practicing Consistently
Consistency is key when working on your ollie. Set aside short practice sessions daily instead of long, irregular ones. This helps your fingers build muscle memory without getting tired or frustrated.
Try breaking down the ollie into smaller parts—like popping the tail, sliding your finger, and landing cleanly. Practice each part separately before putting them all together.
Ask yourself: Are you giving yourself enough time to develop control, or are you rushing through the motion? Patience often beats speed in fingerboarding.
Recording And Reviewing Tricks
Recording your ollie attempts can reveal small mistakes you might not notice in real time. Use your phone or webcam to capture your sessions from different angles.
Watch the footage closely and look for areas to improve, such as finger placement, timing, and board height. Sometimes, you’ll catch habits that slow you down or cause slips.
After reviewing, set clear goals for your next practice session based on what you observed. Do you need to pop harder? Slide smoother? Pinpointing these details makes your practice more effective.
Credit: www.instagram.com
Advanced Ollie Variations
Advanced Ollie variations add style and complexity to your Tech Deck tricks. These moves combine basic ollie skills with spins and flips. They require more control and practice to perform smoothly. Learning these tricks can impress friends and improve your fingerboarding skills.
Ollie 180
The Ollie 180 involves spinning the board 180 degrees in the air. Start with a standard ollie. As the board pops, twist your fingers to turn it halfway around. Keep your eyes on the board to catch it on landing. Balance is key to land the trick cleanly.
Practice the motion slowly first. Use small jumps to control the spin. Gradually increase speed as you get comfortable.
Pop Shuvit
The Pop Shuvit combines a pop with a board spin under your fingers. Begin by popping the board like a normal ollie. At the same time, scoop the tail with your back finger to spin the board 180 degrees horizontally. Your front finger helps guide the board’s rotation.
Watch the board carefully to catch it after the spin. Timing your scoop and pop together is important. Practice the scoop motion separately to build muscle memory.
Frequently Asked Questions
How Do I Start Learning Ollie On Tech Deck?
Begin by positioning your fingers correctly on the Tech Deck. Practice popping the tail down and sliding your front finger forward. Repeat until you feel comfortable with the motion. Consistent practice improves control and helps you master the Ollie trick smoothly.
What Finger Placement Works Best For Tech Deck Ollie?
Place your middle finger on the tail and your index finger near the middle. This grip allows better control and balance. Proper finger placement is key to executing the Ollie smoothly and maintaining board stability during the trick.
How Can I Improve Ollie Height On Tech Deck?
Focus on popping the tail harder while sliding your front finger quickly forward. Timing is crucial; the slide should follow the pop immediately. Regular practice with these techniques will help increase the Ollie’s height and overall performance.
Why Does My Tech Deck Ollie Keep Slipping?
Slipping often happens due to incorrect finger placement or insufficient tail pop. Ensure your fingers are firmly positioned, and practice popping the tail with enough force. Also, maintain a smooth slide to control the board better and prevent slips.
Conclusion
Mastering the ollie on a Tech Deck takes practice. Start with the basics. Focus on finger placement and flick timing. Keep your movements smooth and controlled. Practice daily to improve your skills. Watch tutorials for tips and tricks. Make sure your board is in good condition.
Experiment with different surfaces. Don’t rush the process. Be patient and persistent. Small improvements will build over time. Enjoy the journey of learning. Celebrate each successful ollie. Share your progress with friends. Soon, you’ll be doing ollies with ease. Keep having fun as you practice and learn!
