How Do You Do an Ollie on a Tech Deck: Easy Steps to Master It

Have you ever watched someone pull off a perfect ollie on a Tech Deck and wondered how they make it look so easy? If you want to impress your friends or just master this cool trick yourself, you’re in the right place.

Learning to do an ollie on a Tech Deck might seem tricky at first, but with the right tips and practice, you’ll be landing it smoothly in no time. Keep reading to discover simple steps that will help you take your Tech Deck skills to the next level!

Credit: www.instagram.com

Getting Started With Tech Deck

Starting with Tech Deck is simple and fun. It gives a small, real feel of skateboarding with your fingers. Before learning an ollie, knowing your Tech Deck well helps improve your tricks. It builds confidence and control over the board.

Choosing The Right Tech Deck

Pick a Tech Deck that feels good in your hand. Some decks are smaller or larger. Find one that fits your finger size. Check the grip tape on top. It should be rough enough to hold your fingers steady. The wheels should roll smoothly. Look for a board that is sturdy and not too heavy.

Understanding Basic Components

Know the parts of your Tech Deck. The deck is the flat board where you place your fingers. Trucks are metal parts that hold the wheels. Wheels help your Tech Deck move. Grip tape keeps your fingers from slipping. Knowing these parts helps you control your board better.

Credit: www.tiktok.com

Fundamentals Of An Ollie

Understanding the fundamentals of an ollie is key to performing it well on a Tech Deck. This trick forms the base for many other moves. Knowing what an ollie is and the physics behind it helps improve your technique. Let’s break down these basics clearly.

What Is An Ollie?

An ollie is a jump with the skateboard. The rider pops the tail down and lifts the board into the air. No hands touch the board during the jump. It looks like the board sticks to the rider’s feet.

On a Tech Deck, the ollie is a small but tricky move. You use your fingers to mimic the skateboard motion. This trick helps you move over obstacles or start combos.

Physics Behind The Ollie

The ollie works by using force and timing. Pressing down on the tail creates a quick snap. This snap lifts the board’s back end. At the same time, sliding your front finger forward levels the board in the air.

Gravity pulls the board and fingers down. Your fingers keep the board close by applying gentle pressure. The balance of forces lets the board rise and stay with your fingers.

Timing the pop and slide is crucial. Too slow or too fast can cause a failed ollie. Practice helps your body and fingers sync perfectly for a smooth jump.

Step-by-step Guide

Learning to do an ollie on a Tech Deck takes practice and focus. Follow this step-by-step guide to understand each move clearly. Each part helps you get closer to a smooth ollie. Pay attention to finger placement and timing.

Positioning Your Fingers

Place your index finger near the front of the board. Your thumb should rest on the side for grip. Keep your middle finger on the tail of the board. This setup gives control and balance before the pop.

Executing The Pop

Press down sharply with your middle finger on the tail. The board will lift slightly off the surface. Use a quick, firm motion to create enough pop. This action starts the ollie’s upward movement.

Sliding Your Fingers Forward

After the pop, slide your index finger forward along the board. This motion levels the board in the air. It helps the board stay flat while rising. Smooth finger movement improves control and height.

Balancing And Landing

Keep your fingers steady to maintain balance. Focus on catching the board with both fingers evenly. Lower the board gently back to the surface. Stay relaxed and use soft pressure for a clean landing.

Credit: www.instagram.com

Common Mistakes To Avoid

Mastering the ollie on a Tech Deck can be tricky, especially when common mistakes slow down your progress. Recognizing what often goes wrong helps you fix those issues faster and get smoother tricks. Let’s look at some frequent errors and how to avoid them so your ollie looks clean and controlled every time.

Incorrect Finger Placement

Your fingers control the board’s movement, so placing them correctly is key. If your back finger is too far forward or your front finger too far back, the flick won’t generate enough pop. I once struggled because my front finger rested too close to the middle, making the board slide instead of lift.

Try positioning your back finger on the tail’s edge and your front finger near the middle of the board’s upper surface. This setup gives you better control and a sharper flick. Have you checked your finger spots carefully during practice?

Timing Errors

The ollie depends on perfect timing between the pop and the flick. A common mistake is popping the tail too early or flicking too late, which causes the board to stay flat or slide out. I noticed my ollie looked weak until I synced the flick right after the pop.

Practice snapping the tail down firmly and immediately following with a quick front finger flick off the side. Pay attention to the rhythm—does your board feel like it’s responding instantly? If not, adjust your timing in small steps until it clicks.

Lack Of Balance

Balance on a tiny Tech Deck is harder than on a full skateboard, but it’s essential for a clean ollie. Leaning too far forward or backward often makes the board tip or spin out. Early on, I found myself tipping the board because I didn’t keep my weight centered over the deck.

Focus on keeping your weight evenly distributed between your fingers and stay relaxed. Try small shifts forward and backward while stationary to find your balance sweet spot. Can you keep the board steady before you pop and flick?

Tips For Perfecting Your Ollie

Perfecting your ollie on a Tech Deck takes more than just trying over and over. It requires focused practice, sharpening your finger skills, and building the confidence to land each trick smoothly. These tips will help you move beyond the basics and truly master your ollie.

Practice Techniques

Start by breaking down the ollie into smaller parts. Practice popping the tail down sharply, then flicking your finger forward to mimic the board’s jump. Repeating these moves separately can help you understand the timing better.

Use a flat surface with good grip and try to keep your hand steady. Record yourself to see where your flick or pop might be off. Have you noticed how subtle changes in speed affect your ollie height? Adjust and try again.

Enhancing Finger Dexterity

Your fingers control every move on a Tech Deck. Strengthen them by doing simple exercises like squeezing a stress ball or using finger stretchers. These exercises improve control and reduce fatigue during long practice sessions.

Try finger drills on the Tech Deck itself, like repeatedly flicking the tail or sliding your finger along the board’s edge. Can you feel the difference when your fingers move faster or more precisely? Developing this dexterity will make your ollie smoother and more consistent.

Building Confidence

Confidence comes from knowing your technique and trusting your fingers. Start with small ollies before attempting higher jumps. Celebrate small wins; even a tiny pop counts as progress.

Don’t rush to land perfect tricks every time. Instead, focus on feeling comfortable with each motion. Have you ever noticed how confidence can make your fingers move more naturally? Keep practicing, and your ollies will soon look effortless.

Advanced Tricks To Try

Once you’ve mastered the basic ollie on your Tech Deck, it’s time to push your skills further. Advanced tricks not only impress your friends but also sharpen your finger control and timing. These moves demand practice but will elevate your Tech Deck game to a whole new level.

Kickflip

The kickflip adds a spinning flip to your ollie, making the board rotate along its length before landing. To pull it off, flick your finger off the edge of the deck as you pop the ollie. Timing your flick just right is key—you want the board to spin fully and land flat under your fingers.

Try practicing the flick motion without popping first, just to get the feel of the spin. You might notice that a sharper flick results in a faster rotation. How precise can you get your flick before the board flips out of control?

Heelflip

The heelflip is like the kickflip’s sibling but flips the board in the opposite direction. Instead of flicking with your index finger, use your heel finger to push the board’s side during the ollie. This trick challenges your finger positioning and coordination in a fresh way.

Focus on a smooth scoop with your heel finger to get that clean flip. It might feel awkward at first, but practicing slow, controlled flicks will build muscle memory. How does switching finger roles change your overall board control?

360 Flip

Combining the kickflip and a full 360-degree board spin, the 360 flip is one of the most advanced Tech Deck tricks. You need to pop the board hard, flick for the kickflip, and use your other finger to spin the board all the way around. It demands precise timing and confidence in your finger movements.

Break down the trick into parts: first practice the 360 shove-it, then add the kickflip flick separately. When you start combining them, notice how each finger’s movement affects the board’s rotation. How quickly can you sync both motions to land the perfect 360 flip?

Frequently Asked Questions

How Do You Position Fingers For A Tech Deck Ollie?

Place your index finger near the tail and your thumb on the side. This grip helps you pop and flick the board smoothly.

What Is The Key Step To Pop The Tech Deck Ollie?

Press down hard on the tail to make the board lift. Timing your finger flick right after is crucial for height.

How Can I Improve Flicking For A Higher Tech Deck Ollie?

Practice flicking your index finger off the side edge quickly. Consistent flicks help increase control and ollie height.

How Long Does It Take To Learn A Tech Deck Ollie?

Most beginners master it within a few days of daily practice. Focus on finger placement, pop strength, and flick timing.

Conclusion

Practicing the Ollie on a Tech Deck takes time and patience. Start slow and focus on your finger movements. Keep your board steady and use your thumbs to pop it up. Don’t get discouraged if it feels hard at first.

Each try helps you improve a little more. Soon, you will land clean Ollies and enjoy the fun. Remember, small steps lead to big progress. Keep practicing and have fun with your Tech Deck tricks.